Detail 01
.055-.110 gauge
A step up from the common .045-.105. Noticeably more tension at standard pitch and a thicker feel under the fingers.
Product detailSKU #1273887998549
Ernie Ball2831 Roundwound Power Slinky Bass Guitar Strings - (55-110)
1/2
Independent shopping perspective
The Korena take
Roundwound nickel-wound bass strings, .055-.110. A heavier-than-standard set for players who want more tension, drop tunings or a stiffer feel.
Strong match
Who this is for
- Drop tunings that go slack on a standard .045-.105 set
- Players who dig in hard and want less string flop
- Bassists chasing a firmer, more resistant right-hand feel
Consider the trade-offs
When to look elsewhere
- Beginners — the added tension makes fretting harder
- Players wanting fast, light action or easy bends
- Anyone after the smooth, dark thump of flatwounds
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Roundwound
Ridged outer wrap. Bright and aggressive with pronounced attack, plus the finger noise that comes with roundwounds.
Detail 03
4-string set
Covers E, A, D and G. Nothing here for a 5- or 6-string; those need a set with a low B or high C.
Detail 04
Heavier tension
Holds pitch better when you tune down, but pulls harder on the neck than a lighter set.
Final check
Know before you order
- 01Moving up a gauge usually needs a truss rod and intonation adjustment
- 02Fatter cores may not drop through undrilled tuner posts without trimming
- 03Roundwounds wear frets faster than flats — expect more fingerboard noise
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will these fit a 5-string bass?
No. This is a four-string set covering E, A, D and G. A five-string needs a dedicated set that includes a low B, since the B has to be much thicker to hold pitch.
02Do I need a setup after switching to these?
Usually yes. Going from a standard .045-.105 set to .055-.110 adds tension, which pulls the neck forward. Expect to adjust the truss rod and reset intonation.
03Are these good for drop tuning?
Yes, that is the main reason to choose this gauge. The heavier strings stay tighter when you tune down, so the low string keeps definition instead of going slack and rattling.
04What is the difference between roundwound and flatwound?
Roundwound has a ridged outer wrap that sounds bright with strong attack and audible finger squeak. Flatwound is smooth, darker and thumpier, with less finger noise and less fret wear.
