Detail 01
Power Soak: 20W, 5W, 1W, speaker off
Four output settings let you select the amp’s operating level, including a speaker-off mode.
Product detailSKU #1500000466932
ENGLE725 Ravager IR Compact Tube Guitar Amp Head Black
djentprogressive metalrockprogressive rock
1/3
Independent shopping perspective
The Korena take
The E725 Ravager IR puts a two-channel, 20W tube head into a compact black enclosure. Clean and Lead channels each have their own gain and volume controls, while a global three-band EQ and master handle overall shaping. Its 12AX7/ECC83 preamp and EL84 power section are joined by a built-in IR loader, USB access and IR-balanced XLR output. Select 20W, 5W, 1W or speaker-off operation to suit the setup, then use the line or headphone output when a direct connection is needed.
Strong match
Who this is for
- Switching between dedicated Clean and Lead channel settings during a set.
- Direct recording or sending cabinet-emulated output through the balanced XLR connection.
- Using reduced-power or speaker-off settings for lower-volume setups.
Consider the trade-offs
When to look elsewhere
- Players who require a supplied footswitch; footswitch support is provided, but no footswitch is included.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Built-in IR loader
Four impulse responses are available; three slots can be customized through USB.
Detail 03
Outputs
The head provides an 8/16-ohm speaker output, line out and balanced XLR IR output.
Detail 04
Channels and EQ
Clean and Lead each have gain and volume controls; EQ is a shared three-band section.
Final check
Know before you order
- 01Select a compatible 8- or 16-ohm speaker connection for the 1/4-inch speaker output.
- 02A footswitch can be used but is not included.
- 03For customized IR slots, USB connectivity is provided.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels does the Ravager IR have?
It has two channels: Clean and Lead, each with separate gain and volume controls.
02Does it offer a direct XLR output?
Yes. It has one balanced XLR IR output, plus a 1/4-inch line output.
03Can it run with the speaker off?
Yes. Speaker off is one of the selectable power settings.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- EQ
- Global 3-band EQ
- Power
- 20W (with 5W, 1W, speaker off settings)
3 detailsPickups & controls
- Footswitch
- Yes (not included)
- Global Controls
- Master
- Preamp Tubes
- 12AX7/ECC83
2 detailsBody & build
- Color
- Black
- Type
- Tube amp head
4 detailsConnections & power
- Outputs
- 1 x 1/4 inch (8/16 ohms), 1 x 1/4 inch (line out), 1 x XLR (IR balanced out)
- USB
- Yes
- Inputs
- 1 x 1/4 inch
- Power Tubes
- EL84
2 detailsSize & weight
- Weight
- 13.34
- Dimensions
- 13.58 inch x 7.68 inch x 6.3 inch
6 detailsOther
- Headphones
- 1 x 1/8 inch
- Clean
- Gain, volume
- Lead
- Gain, volume
- Channels
- 2 (Clean, Lead)
- Ir Loader
- Built-in with 4 impulse responses (3 customizable slots)
- Fx Loop
- Yes
