Detail 01
10-gauge cold-rolled steel
Roughly 1/8 in. thick steel. Stiff under load, and it takes the weight without flexing at the pivot.
Product detailSKU #1278002525930
Electro-VoiceMB 200 Wall/Ceiling Mount "U"Bracket Kit - Black
1/3
Independent shopping perspective
The Korena take
A steel U-bracket kit for wall or ceiling mounting a speaker enclosure. For installers doing fixed installs, not portable gig setups.
Strong match
Who this is for
- Permanent install where a speaker aims down from a wall
- Ceiling mounting when the enclosure must stay put
- Jobs needing steel hardware over plastic or aluminum brackets
Consider the trade-offs
When to look elsewhere
- Portable rigs — a tripod stand is faster and cheaper
- Enclosures whose mount points don't match the two 8mm holes
- Drywall-only surfaces with no stud or backing behind
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
7.5 lb bracket weight
The bracket alone is heavy before the speaker goes on. Your anchor has to carry both.
Detail 03
Three 8mm wall holes
Three anchor points, so you can hit a stud and spread the load rather than relying on one fastener.
Detail 04
Two 8mm enclosure holes
The speaker attaches at two points, letting it pivot on that axis for aim.
Detail 05
Black wrinkle powder coat
Textured finish hides fingerprints and scuffs, and disappears against dark ceilings better than gloss.
Final check
Know before you order
- 01Confirm your enclosure's mount points line up with two 8mm holes
- 02Wall anchors or lag bolts are a separate buy, sized to your surface
- 03Check total load: bracket plus speaker, into structure — not drywall alone
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I mount this on the ceiling?
Yes. It's rated for wall or ceiling mounting. Ceiling installs put the full load in tension, so anchor into structure and size the hardware accordingly.
02Does it come with screws or anchors?
Plan on sourcing mounting hardware yourself. The holes are 8mm (5/16 in.), so pick bolts or lags that fit those and suit your wall material.
03Will it fit my speaker?
It attaches through two 8mm holes on the enclosure. Check your speaker's mount points against that spacing before ordering.
04Can I aim the speaker after it's mounted?
The U-shape lets the enclosure pivot between the two arms, so you can angle it down or across. Aim is fixed once you tighten it.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsBody & build
- Color
- Black
- Material
- 10-gauge cold-rolled steel
- Body Finish
- Black wrinkle powdered coat
- Finish
- Black wrinkle powdered coat
3 detailsSize & weight
- Weight
- 7.5
- Shipping Weight
- 8.44 lb. (3.83 kg)
- Net Weight
- 7.50 lb. (3.40 kg)
2 detailsOther
- Wall Mounting Holes
- 3 - 8mm (5/16 inch) diameter holes
- Enclosure Mounting Holes
- 2 - 8mm (5/16 inch) diameter holes,
