Detail 01
4 channels
Four separately dimmable circuits. Multiple lamps can share one channel, but they then fade together as a group.
Product detailSKU #1315669852422
ElationCYBER PAK 4-Channel Dimmer
Independent shopping perspective
The Korena take
Four-channel dimmer pack for controlling conventional lighting from a DMX console. For small stages and DJs running non-LED fixtures.
Strong match
Who this is for
- Dimming PAR cans and other conventional lamps from a DMX board
- Small club or mobile DJ rigs with four fixture circuits
- Adding console control to lights that have no onboard dimming
Consider the trade-offs
When to look elsewhere
- LED fixtures, which have their own dimming and can be damaged
- Rigs needing more than four independent dimmed circuits
- Anyone without a DMX controller or a dimmer-capable console
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Dimmer pack, not a controller
It executes levels sent to it. The fade moves and chases come from a console you supply.
Detail 03
For conventional lamps
Built for incandescent and halogen fixtures that dim by cutting voltage. LEDs need constant power and their own DMX control.
Detail 04
DMX input
Chains into a standard lighting network, so it sits alongside other DMX gear on one control run.
Detail 05
Pack format
Sits on the floor or mounts near the fixtures, keeping high-current runs short instead of routing everything to the console.
Final check
Know before you order
- 01No DMX controller, DMX cable or lamps included
- 02Check total wattage per channel against the fixtures you plan to plug in
- 03Confirm your circuit and breaker can carry all four channels at full
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I use this with LED lights?
No. Dimmer packs vary voltage, which LED fixtures are not built to receive. Plug LEDs into normal switched power and dim them over DMX instead.
02Do I need a lighting controller?
Yes. The pack has no programming of its own — it responds to DMX levels from a console or a DMX interface running lighting software.
03How many lights can I connect?
Four independently controlled circuits. You can put several lamps on one circuit if the combined wattage stays within that channel's rating.
04What cable do I need?
DMX cable from your controller to the pack, plus power cables from each fixture into the pack's outputs. Neither is included.
