Korena
Product detailSKU #1500000446468

EarthworksDM17 Tom and Snare Drum Microphone Black

Earthworks
Earthworks DM17 Tom and Snare Drum Microphone Black
1/2

Independent shopping perspective

The Korena take

DM17 is a cardioid microphone made for snare and tom capture. Its tight cardioid pattern is intended to focus on the drum while reducing sound arriving from other instruments. The included RM3 rim mount attaches the microphone to a snare or tom rim, removing the need for a mic stand and making placement more direct. With 155 dB SPL handling, XLR output, and 24–48V phantom-power operation, it is equipped for live performance, studio recording, and live-stream drum capture.

Earthworks DM17 Tom and Snare Drum Microphone Black product detail
Product studyEarthworks DM17 Tom and Snare Drum Microphone Black

Strong match

Who this is for

  • Mounting a microphone directly on snare or tom rims instead of using mic stands.
  • Drum setups needing a cardioid pattern to reduce bleed from other instruments.
  • Live, studio, or livestream drum capture with 155 dB SPL handling.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

RM3 drum rim mount included

It mounts the microphone to a snare or tom rim without a mic stand.

Detail 02

Cardioid polar pattern

It focuses on the drum while reducing sound from other instruments.

Detail 03

155 dB maximum SPL

The microphone is specified to handle very high sound-pressure levels.

Detail 04

24–48V phantom power

The microphone requires phantom power within that range.

Final check

Know before you order

  1. 01Your recording or live setup needs to provide 24–48V phantom power.
  2. 02The RM3 is intended for metal drum hoops and suspension mounts.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Is a drum mount included?

Yes. The DM17 includes the RM3 drum rim mount.

02What connector does it use?

It has a 3-pin male XLR connector.

03Can it handle loud drums?

Its maximum SPL rating is 155 dB.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

4 detailsSound
Max SPL
155dB
Polar Pattern
Cardioid
Frequency Response
20Hz–20kHz
Sensitivity
36 mV/Pa (-29 dBV/Pa)
1 detailsBody & build
Color
Black
4 detailsConnections & power
Output Impedance
100 Ohms
Phantom Power
24 - 48V
Output
XLR (pin 2+)
Connector
XLR 3-pin male
3 detailsSize & weight
Length
5.25 inch (133 mm)
Weight
4.4
Diameter
0.82 inch (21 mm)
2 detailsOther
Current Consumption
4mA
Noise
22dB SPL equivalent (A weighted)