Detail 01
1 input to 4 buffered outputs
One incoming signal is distributed across four separate outputs.
Product detailSKU #1500000461451
EarthQuaker DevicesOne to Four Splitter Black and White
rockpsychedelicalternative
1/7
Independent shopping perspective
The Korena take
One to Four Splitter takes one incoming signal and sends it to four buffered outputs for parallel routing. Each output uses a unity-gain buffer, with a 1 MΩ input impedance and 100 Ω output impedance specified for the unit. It suits rigs that need to feed several destinations from one source, including multi-amp or parallel effects arrangements. The compact metal enclosure is 4.75 by 2.5 by 1.5 inches and requires external 9V DC power.
Strong match
Who this is for
- Sending one source to four buffered destinations in a parallel pedal or amplifier routing setup.
- Studio or stage rigs that need several simultaneous paths from one input signal.
Consider the trade-offs
When to look elsewhere
- Setups that need to combine multiple inputs into one output.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Unity-gain buffer for parallel routing
The splitter is designed to create parallel paths without adding gain.
Detail 03
15 mA current draw
Use this figure when allocating capacity from a 9V DC power source.
Final check
Know before you order
- 01An external 9V DC power supply is required.
- 02This is a one-input-to-four-output unit, not a mixer.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many outputs does it provide?
Four buffered outputs from one input.
02Does it add gain?
Its outputs use unity-gain buffers.
03What power does it need?
External 9V DC power; current draw is 15 mA.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Power
- 9V DC only (external power supply required)
3 detailsBody & build
- Color
- Black
- Country of Origin
- USA (Akron, Ohio)
- Type
- Buffered signal splitter
2 detailsConnections & power
- Input Impedance
- 1 MΩ
- Output Impedance
- 100 Ω
4 detailsSize & weight
- Dimensions Boxed
- 3.25 inch H x 5.5 inch W x 3.25 inch D
- Dimensions Out of Box
- 1.5 inch H x 4.75 inch W x 2.5 inch D
- Weight Boxed
- 0.66 lb.
- Weight Out of Box
- 0.52 lb.
4 detailsOther
- Configuration
- 1 input to 4 buffered outputs
- Current Draw
- 15 mA
- Enclosure
- Compact metal chassis
- Function
- Unity gain buffer for parallel routing
