Detail 01
Bass drum hoop mount
Clamps directly to the batter-side hoop, so cymbal position moves with the drum and can mar the hoop finish.
Product detailSKU #1274115037903
DWBass Drum Mounted Cymbal Arm
Independent shopping perspective
The Korena take
A short cymbal arm that clamps to the bass drum hoop, putting a splash or small crash within reach without adding another stand to the floor.
Strong match
Who this is for
- Small stages and cramped setups where floor space is gone
- Adding a splash or effects cymbal close to the snare
- Gigging kits where fewer stands means faster load-in
Consider the trade-offs
When to look elsewhere
- Large, heavy crashes or rides that need a proper boom stand
- Drummers who move the bass drum often mid-set
- Anyone wanting cymbal height independent of the bass drum
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Short arm length
Reach is limited compared to a boom stand — designed for cymbals near the kick, not across the kit.
Detail 03
Vibration path through the shell
Cymbal wash transfers into the bass drum and into overhead and kick mics more than a floor stand does.
Detail 04
Load rating by design
Sized for splashes and small crashes; a heavy cymbal will droop and stress the hoop clamp.
Detail 05
Clamp-based height
Vertical range starts at hoop height, so low cymbal placements are not possible.
Final check
Know before you order
- 01Cymbal, felts and sleeve may need checking — mount hardware varies by configuration
- 02Wood hoops can dent under the clamp; a thin protective strip helps
- 03Confirm the clamp opening fits your hoop thickness, especially on thick or die-cast hoops
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will it damage my bass drum hoop?
The clamp presses on the hoop. Snug it enough to hold and no more, and consider a soft shim under the jaw on lacquered wood hoops.
02How big a cymbal can I hang on it?
Stick to splashes and small crashes. Heavier cymbals overload the arm and put leverage on the hoop clamp.
03Does it fit any bass drum?
It fits standard bass drum hoops. Unusually thick or die-cast hoops may exceed the clamp's opening — measure first.
04Will it change how my kick sounds?
Slightly. The cymbal's vibration couples into the shell and bleeds into kick and overhead mics more than a separate stand would.
