Detail 01
1 in. bore
Sized to DW's thinner rack tubing. Measure your tube before ordering; 1.5 in. bars need the larger lock.
Product detailSKU #1316478173422
DW1 in. Hinged Rack Memory Lock
Independent shopping perspective
The Korena take
A single hinged memory lock for 1 in. rack tubing. Buy it if you break down and reset a DW rack and want your positions back exactly.
Strong match
Who this is for
- Gigging drummers who tear down and rebuild a rack weekly
- Marking clamp height on a 1 in. rack leg
- Replacing a lock lost in a case or trailer
Consider the trade-offs
When to look elsewhere
- Anyone with 1.5 in. rack tubing — the bore won't fit
- Drummers with a permanently set rack that never moves
- Players wanting a clamp that holds an arm or cymbal
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Hinged design
Opens and wraps around the tube, so you can add it mid-rack without pulling clamps or end caps off.
Detail 03
Memory lock function
Stops a clamp or leg from sliding past a set point. Height returns identically after every teardown.
Detail 04
Sold as one piece
Each position you want to mark needs its own lock. A full rack usually takes several.
Final check
Know before you order
- 01One lock per marked position — count your clamps and legs first
- 02Measure tube diameter; this is the 1 in. version only
- 03Holds nothing on its own — it's a stop, not a mount
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this fit a 1.5 in. rack tube?
No. This is the 1 in. version. The hinge closes on 1 in. tubing only — a larger bar needs the 1.5 in. memory lock.
02Do I have to disassemble my rack to install it?
No. The hinge opens so the lock wraps around the tube in place, then closes and tightens.
03How many do I need?
One for every position you want to return to — typically one under each rack leg and each clamp you move regularly.
04Does it hold a cymbal arm?
No. It only stops something from sliding down or past a point. The clamp still does the holding.
