Detail 01
XLR D.I. with pre/post-EQ switch
Lets the direct output be set before or after the amp's EQ.
Product detailSKU #1500000046378
DV MarkAC 101H 150W 1x10 Acoustic Combo Amp
1/4
Independent shopping perspective
The Korena take
Built for amplified acoustic instruments, the AC 101H combines 150W solid-state power with a custom 10-inch DV Mark speaker and 1-inch voice-coil tweeter. Two inputs, 48V phantom power, feedback control, and phase reverse cover core acoustic-performance needs, including condenser-mic use and feedback management. An XLR D.I. with selectable pre/post EQ, effects loop, tuner output, digital reverb, and chorus make it practical for stage or studio routing. The brown finish completes its current look.
Strong match
Who this is for
- Acoustic performances using condenser microphones, with 48V phantom power available at the amp.
- Managing feedback problems through the amp's feedback control and phase-reverse functions.
- Stage or studio routing that uses the XLR D.I., effects loop, or tuner output.
Consider the trade-offs
When to look elsewhere
- Headphone monitoring, as no headphone output is listed.
- A built-in tuner, as the amp provides tuner output rather than a built-in tuner.
- Footswitch control, as it is not footswitchable.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
FX send/return
Provides a connection point for external effects routing.
Detail 03
External speaker output
Provides an output for an external speaker.
Detail 04
Closed-back cabinet
The combo uses a closed-back cabinet design.
Final check
Know before you order
- 01Use a condenser microphone only when 48V phantom power is appropriate for it.
- 02If you need headphone practice or footswitch operation, those functions are not listed.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I connect a condenser microphone?
Yes. The AC 101H provides 48V phantom power for condenser microphones.
02Does it have onboard effects?
Yes. Digital reverb and chorus are included.
03Can I send the amp signal to another system?
It has an XLR D.I. with a pre/post-EQ switch.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
6 detailsSound
- Impedance
- 8 ohms
- Speakers
- 1x10 inch
- Speaker Brand
- DV Mark
- Speaker Model S
- Info not available
- Effects Loop
- Yes
- Maximum Wattage
- 126W–150W; 150W
4 detailsPickups & controls
- MIDI Control
- No
- Footswitchable
- No
- Voicing Control
- No
- Footswitch Included
- No
2 detailsBody & build
- Type
- Combo
- Cab Back Panel
- Closed-back
7 detailsConnections & power
- Headphone Output
- No
- Number of Inputs
- 2
- External Speaker Output
- Yes
- Direct Output
- No
- Power Attenuation
- No
- Cab Power Handling
- 200W
- Aux Input
- No
1 detailsSize & weight
- Depth
- Yes
23 detailsOther
- Modulation
- No
- Tube or Solid State
- Solid state
- Cab Angle
- Straight
- Echo
- No
- Number of Modes
- 1
- Flanger
- No
- Presence
- No
- Reverb
- Yes
- Number of Channels
- 2
- Mute
- No
- Resonance
- No
- Delay
- No
- Boost
- No
- Mid Shift
- No
- Bright
- No
- Built in Tuner
- No
- Tremolo
- No
- Phaser
- No
- Channel 1
- 3-band EQ; Volume
- Master Volume
- No
- Contour
- No
- USB Connectivity
- No
- Chorus
- Yes
