Detail 01
Curved pad
Matches a radiused fretboard so all six strings get even pressure. On a flat board the outer strings go soft.

Independent shopping perspective
Spring-tension guitar capo with a curved pad, made for radiused fretboards. Clamps and moves one-handed.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Matches a radiused fretboard so all six strings get even pressure. On a flat board the outer strings go soft.
Detail 02
Fixed clamping force. Fast to move, but you can't reduce pressure if it's pulling notes sharp.
Detail 03
Squeeze and slide with one hand. Practical between verses without stopping.
Detail 04
Position it just behind the fret wire, not on top of it, or you'll get buzz and pitch drift.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Yes, if the fretboard is radiused, which most electrics are. The curved pad is built for that shape.
The pad contacts strings and fretboard, not the finish. Leaving it clamped long-term on the neck isn't necessary, but it isn't harmful.
Spring capos apply fixed pressure, which can stretch strings slightly. Retune after clamping, and place it close behind the fret.
Not well. Classical fingerboards are flat, and a curved pad presses hardest in the middle, leaving the outer strings under-fretted.