Detail 01
Medium-heavy gauge
Higher tension than a standard 10 set. More attack and low-end body, but bends take real hand strength.
Product detailSKU #1273887997777
DR StringsTite-Fit MH-10 Medium-Heavy Nickel Plated Electric Guitar Strings
1/3
Independent shopping perspective
The Korena take
Nickel-plated electric set in a medium-heavy gauge. For drop tunings, heavy picking, or anyone who bends light strings sharp.
Strong match
Who this is for
- Drop tunings that go slack on 9s or 10s
- Heavy right-hand attack that pushes strings out of tune
- Slide and open-tuning players wanting more tension
Consider the trade-offs
When to look elsewhere
- Players who bend a lot — heavier strings fight back
- Floating tremolo guitars without a spring and setup change
- Beginners building finger strength; lighter gauges are kinder
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Nickel plated
Warmer and smoother than stainless, easier on frets. The standard electric guitar sound most amps are voiced around.
Detail 03
Tite-Fit hex core
Hex core under the winding. Stiffer and more focused than round core, holding pitch well under hard picking.
Detail 04
MH-10
Starts at .010 on top but runs heavier through the wound strings, so the low end tightens without a stiff high E.
Detail 05
Electric guitar strings
Steel-based and magnetic. Required for magnetic pickups. Bronze acoustic strings will not work on an electric.
Final check
Know before you order
- 01Going up in gauge usually needs a truss rod and intonation adjustment
- 02Floating tremolos need spring tension rebalanced after the change
- 03Full six-string set only — no tools or accessories included
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What gauges are in the MH-10 set?
It runs a .010 high E with heavier wound strings than a standard 10 set — a medium-heavy balance rather than straight mediums.
02Do I need a setup after switching to these?
Usually yes. Increased tension pulls the neck, so expect truss rod and intonation adjustments, plus spring changes on a tremolo guitar.
03Are these good for drop tuning?
Yes. The heavier wound strings keep tension in drop tunings that would leave lighter sets loose and buzzing.
04Nickel plated or pure nickel?
Nickel plated. It is brighter and more cutting than pure nickel, with the warmth and fret-friendliness stainless steel lacks.
