Detail 01
Low-profile design
Short vertical section, so the mic works near floor level instead of chest or head height.
Product detailSKU #1275776905352
DR ProDR259 MS1500BK Low-Profile Mic Boom Stand
1/2
Independent shopping perspective
The Korena take
A short boom mic stand for miking things low to the ground — kick drums, guitar cabinets, seated players. Basic hardware at a low price.
Strong match
Who this is for
- Miking a kick drum or floor tom
- Close-miking a guitar or bass cabinet
- Seated players, low amps, tight stage corners
Consider the trade-offs
When to look elsewhere
- Overhead drum or choir miking — the boom sits low
- Heavy large-diaphragm condensers on a long reach
- Touring rigs that need road-grade hardware nightly
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Boom arm
Lets you angle the mic in from the side, so the base stays clear of a kick pedal or cab.
Detail 03
Tripod-style base
Legs fold flat for transport but take up floor space when open — plan around pedals and cables.
Detail 04
$79.99 price point
Buys function, not premium castings. Fine for studio and light gigging, not a workhorse for nightly load-ins.
Final check
Know before you order
- 01Measure your kick or cab height — low profile means a limited vertical range
- 02A boom pulls weight sideways; a heavy mic can tip a light stand
- 03Confirm your mic clip threads onto the stand before you need it
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this reach inside a kick drum port?
Yes — that's the main use. The short boom lets you put a mic in or just outside the port hole while the base stays clear of the pedal.
02Can I use it as a regular vocal stand?
No. It's built to hold a mic near the floor, not at mouth height for a standing singer.
03Does it work for guitar amps?
Yes. It's a common choice for close-miking a combo or 4x12 cabinet since the mic sits at speaker height.
04Is it stable enough for a condenser?
For a small pencil condenser, yes. Heavier mics on a fully extended boom will want the boom kept short and the base weighted.
