Detail 01
Medium vs large shank
Has to match your horn's receiver. A medium shank in a large-shank receiver sits too deep and ruins intonation.
Product detailSKU #1274228081229
Denis WickDW5880E-SM Steven Mead Series Euphonium Mouthpiece in Silver 5
1/2
Independent shopping perspective
The Korena take
Silver-plated euphonium mouthpiece from the Steven Mead series. For intermediate and advancing players choosing a specific cup size rather than a stock piece.
Strong match
Who this is for
- Players who know their preferred cup diameter and shank size
- Brass band and solo euphonium work needing projection
- Replacing a worn or generic stock mouthpiece
Consider the trade-offs
When to look elsewhere
- Beginners with no reference point for cup size
- Players needing a baritone-specific piece
- Anyone whose horn takes a shank size this model doesn't match
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Cup diameter, 25.40mm to 27mm across the range
Larger diameter opens the sound and adds low-end volume. Smaller helps the upper register and reduces fatigue.
Detail 03
V-type backbore
Tapers gradually rather than opening abruptly, which favors a warmer, rounder tone over a bright edge.
Detail 04
Throat, 7.12mm to 7.62mm
Wider throat takes more air and gives an open, less resistant blow. Narrower throat gives more resistance to lean on.
Detail 05
Rim width, 6.26mm to 6.80mm
Wider rim spreads pressure and lasts longer on long rehearsals. Narrower rim gives more flexibility and clearer articulation.
Detail 06
Silver plating
Slightly grippier feel than gold plate and standard for brass mouthpieces. Wears through eventually with heavy use.
Final check
Know before you order
- 01Confirm whether your euphonium takes a medium or large shank before ordering
- 02Sizes are not interchangeable — SM2 through SM6 differ in cup, rim, and throat
- 03Switching cup size changes your response; allow adjustment time before a performance
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What's the difference between SM3 and SM3M?
Same cup, rim, throat, and backbore dimensions. SM3 is large shank, SM3M is medium shank. Pick based on your horn's receiver.
02Which size should I start with?
SM3 and SM3M sit in the middle of the range with projection and a warm, clear tone, and are described as solo-oriented. Larger SM2 opens the sound; smaller SM6 favors the high register.
03Will this fit a baritone horn?
This is a euphonium mouthpiece. Fit depends on your instrument's receiver — check the shank size your horn requires before ordering.
04Which size is best for high register?
SM6 has the smallest cup diameter and narrowest rim in the range and is built for the high register. SM4 and SM4M also emphasize upper-register clarity.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Silver
10 detailsOther
- Sm2m
- Medium shank; 27mm cup diameter; 6.75mm rim width; 7.30mm throat; V-type backbore. Large cup diameter allows for an open sound.
- Sm3m
- Medium shank; 26.40mm cup diameter; 6.80mm rim width; 7.38mm throat; V-type backbore. Projection with a warm, clear tone. Good for solo work.
- Sm4m
- Medium shank; 26mm cup diameter; 6.72mm rim width; 7.38mm throat; V-type backbore. Clear, open sound and nice upper register.
- Sm3
- Large shank; 26.40mm cup diameter; 6.80mm rim width; 7.38mm throat; V-type backbore. Ideal soloist mouthpiece with excellent projection and warm, clear tone.
- Sm3 5
- Large shank; 26.40mm cup diameter; 6.80mm rim width; 7.62mm throat; V-type backbore. Slightly larger cup and throat for an open sound.
- Sm2
- Large shank; 27mm cup diameter; 6.75mm rim width; 7.30mm throat; V-type backbore. Large cup diameter and barrel backbore for a big, open sound.
- Sm5
- Large shank; 25.73mm cup diameter; 6.64mm rim width; 7.30mm throat; V-type backbore. Perfect blend of resistance and air flow.
- Sm4
- Large shank; 26mm cup diameter; 6.72mm rim width; 7.38mm throat; V-type backbore. Open sound with excellent clarity in the upper register.
- Sm3 5m
- Medium shank: 26.40mm cup diameter; 6.80mm rim width; 7.62mm throat; V-type backbore. Larger cup and throat from the SM3M; open sound.
- Sm6
- Large shank; 25.40mm cup diameter; 6.26mm rim width; 7.12mm throat; V-type backbore. Excellent high register with clear, resonant sound.
