Detail 01
Red finish
Visually distinguishes this zone from black controls elsewhere in the building. Useful when several plates sit near each other.
Product detailSKU #1315669864955
dbxDBXZCV-FIRE Wall Mount Drive Rack Zone Control
Independent shopping perspective
The Korena take
Red wall-mount zone control for dbx DriveRack systems. Buy it to give staff room-level control in an installed system.
Strong match
Who this is for
- Colour-coding zone controls so staff do not adjust the wrong room
- DriveRack installs needing volume control away from the rack
- Retrofitting control into a finished wall with a standard box
Consider the trade-offs
When to look elsewhere
- Anyone without a compatible dbx DriveRack unit installed
- Portable or live rigs that get torn down after each show
- Players expecting a cable, pedal, or standalone processor
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Wall mount design
Mounts to a standard electrical box. The wall needs to be opened or pre-wired to run cable to the rack.
Detail 03
Zone control, not audio path
Sends control signals rather than passing speaker or line audio. Long runs do not degrade sound quality.
Detail 04
One control per zone
Each plate governs a single zone. Covering four rooms means four plates and four cable runs.
Final check
Know before you order
- 01Requires a compatible dbx DriveRack system — it does nothing on its own
- 02Control cable and wall box are not included
- 03Confirm your specific DriveRack model supports wall zone controllers before ordering
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What is the difference between this and the black ZC-4?
Colour and system pairing. This one is finished in red and is intended for DriveRack zone control; confirm compatibility against your installed processor.
02Can I use it as a standalone volume knob?
No. It sends control data to a dbx processor. Wired to anything else, it does nothing.
03Does installation require an electrician?
Not necessarily, but it needs a standard wall box and a low-voltage cable run back to the rack. In-wall work often falls under local code.
04How many can I run in one building?
That depends on the processor's zone count and control inputs. Check the unit's specification before planning a multi-room layout.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Red
