Detail 01
Blend
Mixes the clean signal with the effected signal.
Product detailSKU #1500000254111
DarkglassHyper Luminal Compressor Bass Effects Pedal
1/5
Independent shopping perspective
The Korena take
Hyper Luminal brings hybrid compression to a bass pedalboard through digitally modeled side-chain behavior and a completely analog signal path. Choose BUS, FET, or SYM, then use the chassis touch sensors to select Ratio and Mode. Four controls cover clean/effected blend, attack and release timing, compression amount, and output level; the 10-LED meter shows gain reduction as you work. Micro USB B access through Darkglass Suite adds model loading and detailed Time settings from a PC or Mac.
Strong match
Who this is for
- Bass pedalboard routing that needs instrument input, 1/4-inch output, and adjustable compression controls.
- Blending clean and compressed bass signals while monitoring gain reduction on a 10-LED meter.
- PC or Mac parameter work through Darkglass Suite, including Time settings and future compressor models.
Consider the trade-offs
When to look elsewhere
- Power supplies other than 9VDC, center-negative, 250mA are not supported.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Time
Sets attack and release constants; Darkglass Suite allows further mapping for each model.
Detail 03
Micro USB B
Connects the pedal to a PC or Mac for upcoming models and parameter settings.
Detail 04
9VDC, center-negative, 250mA
Use only this specified power requirement.
Final check
Know before you order
- 01Plan for 9VDC, center-negative power rated at 250mA.
- 02Use the 1/4-inch input for the instrument and the 1/4-inch output for the amplifier or next effect.
- 03Micro USB B is required for PC/Mac access to upcoming compressor models and detailed settings.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Which compression models are included?
BUS, FET, and SYM are selectable models.
02What does the Blend control do?
It mixes the clean and effected signals.
03How is gain reduction displayed?
A 10-LED gain-reduction meter provides the visual indication.
04What power does the pedal require?
It requires 9VDC only, center-negative, at 250mA.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsConnections & power
- Output
- 1/4 inch connector for the amplifier or next effect in the chain
- Input
- 1/4 inch connector for the instrument
- USB
- A Micro USB B connector allows you to connect the pedal to PC/Mac to load upcoming compressor models, set Time settings and other parameters
1 detailsOther
- 9vdc
- Center negative, 250mA, 9VDC only
