Korena
Product detailSKU #1500000376157

CopperSound PedalsStrategy V2 Preamp Two-Channel Preamp & Overdrive Effects Pedal Olympic White

CopperSound Pedals
aggressivehigh outputwarmmetalrockhard rock
CopperSound Pedals Strategy V2 Preamp Two-Channel Preamp & Overdrive Effects Pedal Olympic White
1/4

Independent shopping perspective

The Korena take

Strategy V2 is a two-channel analog preamp and overdrive pedal built around a Burr Brown op amp. In Preamp Mode, its volume control spans unity output through 30dB of boost; at higher settings, the circuit begins to distort naturally. Switching to Overdrive Mode turns that control into gain, with an internal trim pot setting overall saturation. A shared tone network shapes the balance of lows and highs, and Smart Bypass offers standard or momentary footswitch operation.

CopperSound Pedals Strategy V2 Preamp Two-Channel Preamp & Overdrive Effects Pedal Olympic White product detail
Product studyCopperSound Pedals Strategy V2 Preamp Two-Channel Preamp & Overdrive Effects Pedal Olympic White
CopperSound Pedals Strategy V2 Preamp Two-Channel Preamp & Overdrive Effects Pedal Olympic White alternate view
Alternate view

Strong match

Who this is for

  • Using one pedal as an always-on preamp with a shared tone-shaping control.
  • Moving between up to 30dB of preamp boost and adjustable overdrive saturation.
  • Momentary footswitch use when the Momentary DIP switch remains enabled.

Consider the trade-offs

When to look elsewhere

  • Players who need separate tone stacks for the pedal’s two channels.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

CopperSound Pedals Strategy V2 Preamp Two-Channel Preamp & Overdrive Effects Pedal Olympic White construction detail

Detail 01

Tone control

At lower settings it emphasizes lows and rolls off highs; higher settings emphasize highs and roll off lows.

Detail 02

Internal gain pot

Sets overall saturation in Overdrive Mode; clockwise is harder and counterclockwise is softer.

Detail 03

Smart Bypass

A tap engages the pedal normally, while holding the footswitch activates momentary operation when enabled.

Detail 04

40mA power consumption

Power consumption is specified as 40mA at both 9V and 18V.

Final check

Know before you order

  1. 01Momentary mode is factory enabled; set the Momentary DIP switch to position 1 to turn it off.
  2. 02The internal gain pot is factory set to 50% and controls saturation only in Overdrive Mode.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01How much boost is available in Preamp Mode?

The Volume control runs from unity volume up to 30dB of boost.

02What happens if the pedal loses power?

Its relay-based bypass network allows the signal to pass through unaffected.

03How do I enable momentary operation?

With Smart Bypass enabled, hold the footswitch. The pedal is factory set with momentary mode on.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsPickups & controls
Pickup Configuration
SSS
1 detailsBody & build
Color
White
1 detailsConnections & power
Power Consumption
@ 9V: 40mA | @ 18V: 40mA
1 detailsOther
In Out
1/4 inch instrument cable

Complete your setup

Worth comparing

More from CopperSound Pedals