Detail 01
6 x 20W RGBW LEDs
Six RGBW LEDs provide the main beam output.
Product detailSKU #1500000459142
ColorKeyGrooveBar FX 6 x 20W RGBW LED Moving Head FX with Infinite Bar Rotation, Pixel Control and Dual Halo Strips
1/12
Independent shopping perspective
The Korena take
GrooveBar FX is a compact moving-head bar that pairs six independently controllable 20W RGBW LEDs with integrated dual RGB strip zones. Its 3.4° beams can be programmed into pixel chases and sweeps, while infinite head rotation keeps the motion continuous in either direction. The strip zones add their own dimmable macro effects, including breath, jump, pulse, and gradients. Use DMX512 for detailed programming, or choose master-slave, auto, or sound-active operation for alternate control workflows.
Strong match
Who this is for
- Building tightly focused beam chases with independently controlled RGBW LED pixels.
- Adding continuous rotating movement and secondary RGB strip effects to a stage or dancefloor rig.
- DMX-programmed lighting cues that layer main-beam and strip-zone effects.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
3.4° beam angle
The fixture is designed around narrow, defined beams.
Detail 03
Infinite head rotation
The head can rotate continuously in both directions.
Detail 04
540° pan and 180° tilt with fine adjustment
Pan and tilt position the fixture’s output, with fine-adjustment control.
Detail 05
23/40 DMX channel modes
Two DMX channel configurations are available.
Detail 06
29,200 lux at 6.5 feet
This is the listed illuminance measurement at that distance.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the six main LEDs be programmed independently?
Yes. Each of the six RGBW LEDs can be independently controlled for pixel chases and beam sweeps.
02What are the dual strip zones for?
They provide RGB effects separate from the main beams, with built-in breath, jump, pulse, and gradient macros.
03What control modes are available?
The GrooveBar FX supports DMX512, master-slave, auto, and sound-active control modes.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Power
- IEC Connection
1 detailsPickups & controls
- Control Modes
- DMX512, Master-Slave, Auto, Sound Active
2 detailsConnections & power
- Maximum Power Consumption
- 150W
- Voltage
- AC 100–240V, 50/60Hz
1 detailsSize & weight
- Weight
- 10.8
12 detailsOther
- Tilt
- 180° + Fine Adjustment
- Main Light
- 6 x 20W RGBW LEDs
- Dimmer
- 0–100% Linear Dimming
- Dmx
- 3-Pin DMX In/Out
- Illuminance
- 29,200 lux @ 6.5'
- Strobe
- 0–20Hz
- Size
- 11.2 inch x 6.9 inch x 13.2 inch (28.5 x 17.5 x 33.5 cm)
- Rgb Strips
- Integrated
- Head Rotation
- Infinite
- Pan
- 540° + Fine Adjustment
- Beam Angle
- 3.4°
- Dmx Channel Modes
- 23/40
