Detail 01
Medium gauge
Highest tension of these three sets. More volume and low end, but stiffer under the fingers and harder to bend.

Independent shopping perspective
Coated phosphor bronze medium set. The loudest and stiffest of these three. For strummers and flatpickers with developed hands.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Highest tension of these three sets. More volume and low end, but stiffer under the fingers and harder to bend.
Detail 02
Copper and tin with phosphor added. Warm, slightly darker than 80/20 bronze, and slower to corrode.
Detail 03
A thin layer over the wire slows corrosion from sweat, so the tone stays consistent longer than an uncoated set.
Detail 04
Bronze windings drive a wooden top. Electric pickups won't read them properly.
Detail 05
Mediums pull harder than lights. Some older or lightly braced guitars are only rated for light gauge.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Not always. Some smaller or older guitars are built for light gauge only, and medium tension can pull the top or bow the neck. Check what the maker specifies.
Gauge. Mediums are thicker, so they push more volume and low end but need more finger strength. Ultra lights are easier to play but quieter and thinner sounding.
Likely. Heavier strings pull the neck forward and raise the action. A truss rod adjustment and intonation check will bring it back.
Phosphor bronze is warmer and darker, and holds its tone longer. 80/20 is brighter and more scooped when new. Phosphor suits most players who don't want to change strings weekly.