Detail 01
65 mm length
Shorter barrels push overall pitch up; longer ones pull it down. 65 mm is a common middle setting for A.

Independent shopping perspective
A 65 mm hardwood barrel for A clarinet. For players who want to replace a stock barrel or fine-tune intonation on their A horn.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Shorter barrels push overall pitch up; longer ones pull it down. 65 mm is a common middle setting for A.
Detail 02
A clarinets are longer and pitched a half step below Bb. Barrels are sized per horn and don't cross over.
Detail 03
Wood responds to temperature and humidity. It needs warming before play and swabbing after, unlike plastic.
Detail 04
Priced as a real upgrade part, not a spare. Cost is close to a chunk of a student instrument.
Detail 05
No adjustment mechanism. Tuning changes come from pulling out at the joint or swapping lengths.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
No. This one is cut for A clarinet. The Bb version is a separate part.
Measure the barrel you play now. If you tune well at 65 mm, stay there. If you play sharp, go longer; flat, go shorter.
Wood parts do best with short sessions at first and consistent swabbing. Warm it in your hands before playing in a cold room.
Tenon and socket dimensions differ between makers and models. Check your instrument's fit before committing.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.