Detail 01
2 in. capacity
Sized for standard 2 in. truss tube or pipe. Thinner tubing needs shimming; thicker will not close.
Product detailSKU #1315669853122
CHAUVET DJCLP-15 Heavy-Duty/Lightweight Aluminum C-Clamp 2 in.
Sale
Independent shopping perspective
The Korena take
A 2 in. aluminum C-clamp for hanging lighting fixtures from truss or pipe. Standard hardware for anyone rigging fixtures overhead.
Strong match
Who this is for
- Hanging par cans or moving heads on 2 in. truss
- Mobile DJs rigging lights on portable trussing each night
- Replacing a bent or stripped clamp on an existing fixture
Consider the trade-offs
When to look elsewhere
- Pipe or truss tubing outside the 2 in. range
- Anyone needing a quick-release or hook-style clamp for fast changeovers
- Ground-supported fixtures that never leave the floor
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Aluminum body
Light enough not to add meaningful load to the truss, and it will not rust in damp outdoor gigs.
Detail 03
Wraparound bridge
The clamp closes around the tube rather than pressing from one side, spreading load and reducing the chance of slipping.
Detail 04
0.9 lb
Adds close to a pound per fixture. On a full truss of twenty fixtures that is real weight to count.
Detail 05
5.25 x 4 x 2 in.
Compact enough that fixtures hang close to the tube, keeping trim height low in short-ceiling rooms.
Final check
Know before you order
- 01Check your fixture's yoke bolt size and thread before assuming it mates up
- 02Always run a separate safety cable on every overhead fixture
- 03Measure your truss tube; 2 in. clamps do not fit 1.5 in. pipe
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What size pipe does this fit?
It is a 2 in. clamp, so it is made for 2 in. truss tube or pipe. It will not close around larger tubing.
02Does it come with a bolt to attach my light?
Fixture attachment hardware varies by light. Check the bolt and thread your fixture's yoke uses and match it before rigging.
03Is aluminum strong enough for overhead use?
Aluminum C-clamps are standard rigging hardware for stage lighting. Stay within the load your fixture and truss are rated for, and always use a safety cable.
04Will this work with non-Chauvet fixtures?
Yes. C-clamps are generic hardware; any fixture with a standard yoke and matching bolt can hang from it.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsBody & build
- Color
- Gray
- Bridge Type
- Wraparound
1 detailsSize & weight
- Weight
- 0.9
1 detailsOther
- Size
- 5.25in x 4in x 2in
