Detail 01
Patches 1–6
These are room-reverb patches that progress in size and decay.
Product detailSKU #1500000481753
CatalinbreadCB Paint Late 1900s Reverberator Pedal - Black
dynamicambientpost rockshoegaze
1/4
Independent shopping perspective
The Korena take
CB Paint Late 1900s Reverberator is a digital reverb pedal centered on eight early-digital-style patches. Six room programs increase in size and decay as you move through them, while gated and reverse programs cover more pronounced effect shapes. Mix sets the dry/wet balance, Tone applies a two-pole low-pass filter, and Onset adjusts pre-delay before the reverb arrives. That control set lets you place short reflections behind the dry signal or create larger, delayed reverb blooms.
Strong match
Who this is for
- Dialing room reverb from short reflections through progressively larger and longer-decay patches.
- Adding gated reverb for sharply cut-off ambience on percussive parts.
- Creating a swelling reverse-reverb effect before notes arrive.
Consider the trade-offs
When to look elsewhere
- Players seeking a pedal with only conventional room-style reverb; it also includes gated and reverse patches.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Tone: two-pole low-pass filter
Tone shapes the high-frequency content of the reverb.
Detail 03
Onset: pre-delay
Onset sets delay before the reverb begins.
Detail 04
9VDC center negative, 63mA
The pedal requires center-negative 9VDC power and draws 63mA.
Final check
Know before you order
- 01Use a 9VDC center-negative power source.
- 02The pedal has one 1/4-inch input and one 1/4-inch output.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many reverb modes does CB Paint have?
Eight: six room patches, one gated reverb patch, and one reverse reverb patch.
02What does the Onset control do?
It adjusts pre-delay before the reverb begins.
03What does the Tone control affect?
It is a two-pole low-pass filter for shaping the reverb's high-frequency response.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsPickups & controls
- Mix Control
- Dry/wet blend
- Onset Control
- Pre-delay
- Tone Control
- 2-pole low-pass filter
- Control Knobs
- Tone, Mix, Onset, Mode
1 detailsBody & build
- Color
- Black
3 detailsConnections & power
- Output
- 1 x 1/4 inch
- Input
- 1 x 1/4 inch
- Power Requirement
- 9VDC, center negative
4 detailsSize & weight
- Weight
- 0.4
- Depth
- 4.33 inch
- Width
- 2.36 inch
- Height
- 1.96 inch
7 detailsOther
- Modes
- 8 patches total
- Current Draw
- 63mA
- Patch 8
- Reverse reverb
- Patch 7
- Gated reverb
- Product Type
- Digital reverb pedal
- Model
- CB Paint Reverb
- Patch 1 6
- Room reverb patches with increasing size and decay
