Detail 01
480W Class D power
Provides the module's powered bass amplification.
Product detailSKU #1500000331841
BoseSub1 480W Powered Bass Module
1/5
Independent shopping perspective
The Korena take
Sub1 is a 480W powered bass module that brings low-frequency support down to 40Hz in a compact cabinet. Its 7 x 13 inch high-excursion RaceTrack driver is designed to deliver the impact associated with a conventional 12 inch woofer while keeping the enclosure slim for mobile setups. Connect it to an L1 Pro32 with the included SubMatch cable, or use its XLR or 1/4 inch inputs with a third-party PA. Two stacked modules can engage Cardioid Mode for forward-directed bass.
Strong match
Who this is for
- Portable PA rigs needing low-end support down to 40Hz in a compact enclosure
- L1 Pro32 systems using the included SubMatch cable for power, digital audio, and calibration
- Outdoor events or stages where two stacked modules can focus bass forward
Consider the trade-offs
When to look elsewhere
- Single-module setups requiring Cardioid Mode; that mode uses two stacked Sub1 modules.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
XLR and 1/4 inch inputs
Allow connection with third-party PA systems.
Detail 03
20.87 x 9.84 x 20.87 inches
The cabinet's listed height, width, and depth.
Final check
Know before you order
- 01Cardioid Mode requires two Sub1 modules placed side by side.
- 02An L1 Pro32 connection uses the included SubMatch cable and one outlet.
- 03M20 threaded inserts support mounting to an optional Bose pole.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can Sub1 connect to a PA other than Bose L1 Pro32?
Yes. It has standard XLR and 1/4 inch inputs for third-party PAs.
02What is included for L1 Pro32 connection?
An included SubMatch cable provides power and digital audio, and automatically calibrates the crossover and EQ.
03How do I use Cardioid Mode?
Place two Sub1 modules side by side and activate Cardioid Mode on the rear panel of one module.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Red
3 detailsSize & weight
- Depth
- 20.87 inch (53 cm)
- Width
- 9.84 inch (25 cm)
- Height
- 20.87 inch (53 cm)
