Detail 01
Flexible array positions
Choose Straight, C, J, or Reverse J vertical coverage by pushing or pulling the array into place.
Product detailSKU #1438614490018
BoseF1 Model 812 Flexible Array Loudspeaker Pair
1/16
Independent shopping perspective
The Korena take
Bose F1 Model 812 Flexible Array loudspeakers give a portable PA system a manually adjustable vertical coverage pattern. Set each array Straight, C, J, or Reverse J by moving it into position; the system then changes its EQ for that selection. The pair is suited to live music, DJs, presentations, worship, schools, and hospitality work where the speakers may need to address a floor-level audience, a stage, or raked seating. Each listed loudspeaker is a self-powered two-way design with a 1,000W system rating.
Strong match
Who this is for
- Adapting PA coverage for floor-level audiences, stage setups, raked seating, or bleachers.
- Portable live-music, DJ, worship, school, hospitality, and presentation systems.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Automatic EQ adjustment
The system changes EQ when the coverage pattern is set.
Detail 03
Driver complement
Each listed loudspeaker uses eight 2.25-inch mid-high drivers and one 12-inch low-frequency driver.
Detail 04
Weight
The listed net weight is 44.5 lb (20.18 kg) per loudspeaker.
Detail 05
Inputs and output
Inputs include balanced XLR, 1/4-inch TS/TRS, and two RCA connections; the line output is balanced XLR.
Final check
Know before you order
- 01Plan the array position around the audience layout: Straight, C, J, or Reverse J.
- 02Each listed loudspeaker weighs 44.5 lb (20.18 kg).
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How do I change the coverage pattern?
Push or pull the flexible array into Straight, C, J, or Reverse J position.
02Does the speaker adjust when I move the array?
Yes. Its EQ changes automatically to maintain tonal balance for the selected pattern.
03What controls are on the loudspeaker?
It has volume, signal-input selection, front-LED selection, EQ selection, and power controls.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Frequency Range
- (-10dB) 48Hz–16kHz
- Frequency Response
- (±3dB) 55Hz–14kHz
- Crossover Frequency
- 600Hz Acoustic 4th order Butterworth
1 detailsPickups & controls
- Controls
- Volume level, Signal input select, Front LED function select, EQ select, Power on/off
5 detailsConnections & power
- System Power
- 1,000W
- Distortion At Rated Power
- 0.1 % Max (30Hz–15kHz)
- Line Output
- XLR balanced
- Universal AC Power Rating
- 100-240V 50/60Hz +/- 20 %, 200W max
- Power Indicator
- Blue LED: system on
3 detailsSize & weight
- Weight
- 44.5
- Net Weight
- 44.5 lb. (20.18 kg)
- Dimensions Hxwxd
- 26.1 inch x 13.1 inch x 14.6 inch, (664.66 x 334.3 x 372.5 mm)
11 detailsOther
- Driver Compliment
- 8x2.25 inch mid-high drivers; 1x12 inch LF
- Nominal Dispersion
- 100H x 40V (C-position)
- Signal Indicators
- POWER/FAULT, LIMIT, FRONT LED, SIGNAL INPUT
- System Limiter
- Dynamic limiter
- Enclosure
- High-impact composite materials
- System Type
- Self powered, two-way
- Channel 1
- XLR Balanced: Pin 1 (GND), Pin 2 (+), Pin 3 (-)
- Channel 2
- 1/4 inch TS/TRS, 1ˆ, 8 TS/TRS, (2) RCA
- AC Mains
- IEC Connector
- Maximum SPL 1 M
- 132dB SPL (peak)
- Grille
- Powder-coated perforated steel grille
