Detail 01
600W bi-amplified output
Separate powered drivers deliver the system’s 600W output.
Product detailSKU #1421855832402
BehringerULTRATONE KXD15 Keyboard Amp/PA System
balancedversatilepopelectroniccountry
1/5
Independent shopping perspective
The Korena take
KXD15 brings keyboard amplification and compact PA-style mixing into one 600W bi-amplified system. A four-channel stereo mixer lets you bring keyboards, microphones, backing tracks, and other audio sources together, while the seven-band EQ offers direct control over the balance. Its Klark Teknik processor supplies 100 presets for reverb, chorus, flanger, delay, and more. With a 15-inch woofer, 1-inch compression driver, integrated top handle, and 49.4 weight, it is equipped for rehearsals and live setups that need several sources through one amp.
Strong match
Who this is for
- Rehearsals or live sets combining keyboards, a vocal microphone, backing tracks, and additional sound sources.
- Players who need onboard EQ and preset effects while adapting a keyboard setup to different rooms.
- Mobile keyboard rigs where an integrated top handle helps with transport between rehearsals and shows.
Consider the trade-offs
When to look elsewhere
- Setups requiring more than four mixer channels on the amplifier.
- Spaces that cannot accommodate its 19 x 22.4 x 14.7 inch dimensions.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Four-channel stereo mixer
It can combine keyboards, microphones, backing tracks, and other sound sources in one unit.
Detail 03
Seven-band graphic EQ, ±12 dB
Each EQ band can be boosted or cut by up to 12 dB.
Detail 04
100 Klark Teknik presets
Reverb, chorus, flanger, delay, and other onboard effects are available.
Detail 05
XLR, RCA, and FX send/return connections
The mixer accommodates microphones, RCA backing tracks, and external effects routing.
Detail 06
15-inch woofer / 1-inch compression driver
This is the speaker-driver configuration of the KXD15.
Final check
Know before you order
- 01Confirm the regional mains version matches your local power: 120V, 100V, or 220–240V versions are specified.
- 02Allow for the 19 x 22.4 x 14.7 inch enclosure and 49.4 weight.
- 03Plan your source count around the built-in four-channel stereo mixer.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the KXD15 mix a microphone and keyboards?
Yes. Its four-channel stereo mixer supports keyboards, microphones, backing tracks, and other sound sources; an XLR input is specified for a vocal microphone.
02Does it have onboard effects?
Yes. The Klark Teknik effects processor includes 100 presets, including reverb, chorus, flanger, and delay.
03Can I connect external effects?
Yes. The mixer includes an FX send/return loop for external effects units.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Frequency Range
- 38Hz–20kHz
- Crossover Frequency
- 2.8kHz/2.6kHz
1 detailsPickups & controls
- Control Range
- +/-12dB
1 detailsBody & build
- Type
- 15 inch woofer / 1 inch compression driver
2 detailsConnections & power
- Maximum Output Power
- 600W*
- Power Consumption 1 8 Max Power
- 110W
2 detailsSize & weight
- Weight
- 49.4
- Dimensions
- 19 x 22.4 x 14.7 inch
13 detailsOther
- Usa Canada
- 120V~, 60Hz (T 6.3 A H 250V)
- Crossover Type
- Active
- Japan
- 100V~, 50/60Hz (T 6.3 A H 250V)
- Configuration
- Bi-amping
- Display
- 2-digit, 7-segment
- Uk Australia Europe
- 220-240V~, 50/60Hz (T 3.15 A H 250V)
- Mains Connection
- Standard IEC receptacle
- Overload Protection
- Dual-controlled limiter
- Sampling Rate
- 40kHz
- Enclosure
- Reinforced wood construction
- Korea China
- 220-240V~, 50/60Hz (T 3.15 A H 250V)
- Converters
- 24-bit Delta-Sigma
- Grille
- Perforated steel
