Detail 01
20W power with 1W setting
The amp offers a full 20W setting and a separate 1W power setting.
Product detailSKU #1500000468502
Bad CatOcelot 20W Tube Guitar Amp Head Black
bluespoprockalternativecountry
1/8
Independent shopping perspective
The Korena take
Bad Cat’s Ocelot is a two-channel, 20W tube amp head with a 1W power setting for lower-volume use. Three 12AX7 preamp tubes and two EL84 power tubes drive the amp, while Channel 1 has Volume control and Channel 2 adds Gain. A global three-band EQ, Master and Presence provide overall adjustment. For direct work, Two notes Torpedo DynIR integration provides six onboard virtual cabinets through the XLR and headphone outputs. A buffered effects loop, MIDI input and USB-C broaden the available setup options.
Strong match
Who this is for
- Moving between a 20W amp setting and the 1W setting for home practice or recording.
- Sending a cabinet-simulated signal from the XLR or headphone output during silent playing.
- Using separate clean and gain-focused channel controls with a two-channel footswitch.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Two channels
Channel 1 has Volume control; Channel 2 has independent Volume and Gain controls.
Detail 03
Six DynIR virtual cabinets
The Two notes Torpedo DynIR section has six onboard Bad Cat virtual cabinet presets selected by a six-way switch.
Detail 04
Speaker outputs
Two 1/4-inch speaker outputs work with the amp's 8/16-ohm switch.
Detail 05
Buffered effects loop
The amp includes a buffered loop for connecting effects.
Detail 06
Dimensions
The head measures 12 × 6 × 6.25 inches.
Final check
Know before you order
- 01Match the speaker connection to the amp's 8/16-ohm switch setting.
- 02The included two-channel footswitch supports channel switching.
- 03The amp uses a standard IEC AC cable for power.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does the Ocelot have a lower-power setting?
Yes. Alongside its 20W rating, it has a 1W power setting.
02Can I use cabinet simulation from the direct outputs?
Yes. Two notes Torpedo DynIR integration supplies six onboard virtual cabinets, and the XLR and headphone outputs feed them.
03Is a footswitch included?
Yes. A two-channel footswitch is included.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- EQ
- Global 3-band EQ
- Power
- 20W (with 1W power setting)
4 detailsPickups & controls
- Footswitch
- 2-channel footswitch included
- Cab Level Control
- Yes
- Global Controls
- Master, Presence
- Preamp Tubes
- 3 x 12AX7
2 detailsBody & build
- Color
- Black
- Type
- Tube amp head
4 detailsConnections & power
- Outputs
- 2 x 1/4 inch (8/16-ohm switch), 1 x XLR
- Inputs
- 1 x 1/4 inch
- Power Tubes
- 2 x EL84
- Power Source
- Standard IEC AC cable
1 detailsSize & weight
- Dimensions
- 12 inch x 6 inch x 6.25 inch
11 detailsOther
- MIDI in
- Yes
- Headphones
- 1 x 1/4 inch
- Cabinet Presets
- 6 onboard Bad Cat DynIR virtual cabinets
- USB C
- Yes
- Hi Lo Mode
- Yes
- Virtual Cabinets
- 6-way selector switch
- Channels
- 2
- Channel 1
- Volume
- Channel 2
- Volume, Gain
- Integration
- Two notes Torpedo DynIR
- Fx Loop
- Yes, buffered
