Detail 01
4.5 mV output voltage
The cartridge is specified at 4.5 mV measured at 1 kHz and 5 cm/sec.
Product detailSKU #1500000461877
Audio-TechnicaAT-VM510xCB VMx Conical Bonded Phono Cartridge Black/Blue
1/4
Independent shopping perspective
The Korena take
Built for 1/2-inch mount turntables, the AT-VM510xCB is a Dual Moving Magnet cartridge with threaded inserts that mount using two screws. Its PCUHD coils, aluminum cantilever and low-resonance polymer body form the core of the design, while the V-cut stylus protector provides a placement reference at the record. Set tracking force within the specified 1.8–2.2 g range, with 2.0 g listed as standard.
Strong match
Who this is for
- Mounting a Dual Moving Magnet cartridge on a turntable with a 1/2-inch mount.
- Turntable setups where threaded inserts simplify installation with two mounting screws.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
20 Hz–25 kHz frequency response
Its stated frequency-response range extends from 20 Hz to 25 kHz.
Detail 03
27 dB channel separation
Channel separation is rated at 27 dB at 1 kHz.
Final check
Know before you order
- 01The description identifies a 0.6 mil conical bonded stylus, while the specs identify a 0.3 x 0.7 mil elliptical bonded stylus; confirm the stylus version before ordering.
- 02Requires a turntable with a 1/2-inch mount and two screws for installation.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What turntables does it fit?
It is specified for 1/2-inch mount turntables.
02What tracking force is specified?
The range is 1.8–2.2 g, with 2.0 g listed as the standard setting.
03Which replacement styli are compatible?
It accepts AT-VMx Series styli.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz–25kHz
4 detailsBody & build
- Coil Material
- PCUHD (Pure Copper Ultra High Drawability)
- Color
- Black
- Type
- Dual Moving Magnet
- Body Material
- Low-Resonance Polymer
1 detailsConnections & power
- Output Voltage
- 4.5mV (1kHz, 5cm/sec)
10 detailsOther
- Compatible Styli
- AT-VMx Series Styli
- Configuration
- Paratoroidal, Two Coils Per Channel
- Stylus
- 0.3 x 0.7 mil Elliptical Bonded
- Tracking Force
- 1.8–2.2g (2.0g Standard)
- Coil Configuration
- Paratoroidal, Two Coils Per Channel
- Cantilever
- Aluminum
- Stylus Protector
- V-Cut
- Mounting
- Threaded Inserts (Requires Two Screws)
- Turntable Fit
- 1/2 inch Mount Turntables
- Channel Separation
- 27dB (1kHz)
