Detail 01
ADAT/SPDIF digital input
Can add up to eight extra microphone preamps.
Product detailSKU #1500000372920
AudientiD14 MKII Desktop 10x6 USB Type-C Audio Interface
Sale
1/11
Independent shopping perspective
The Korena take
The iD14 MKII is a 10x6 USB-C desktop interface that starts with two Audient Console mic preamps and a JFET instrument input, then leaves room to grow through its ADAT/SPDIF digital input. It provides both 1/4-inch and mini headphone connections, and its mixer can build up to four stereo artist cue mixes for more involved recording sessions. Use the iD button for assigned monitoring functions, and use a computer-connected audio source for talkback without taking up a mic preamp. USB bus power avoids a separate outlet.
Strong match
Who this is for
- Home recording setups that need two mic preamps and future digital expansion.
- Sessions needing separate artist cue mixes and computer-source talkback.
- Monitoring with either 1/4-inch or mini headphone connections.
Consider the trade-offs
When to look elsewhere
- Recording setups that need more than two built-in microphone preamps without adding digital expansion.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Up to four stereo artist cue mixes
Lets the mixer create separate stereo cue mixes.
Detail 03
Two headphone connections
Includes both 1/4-inch and mini headphone jacks.
Detail 04
6.81 x 4.72 x 2.41 inches
The interface's listed desktop dimensions.
Final check
Know before you order
- 01Additional microphone preamps beyond the two built in require expansion through the ADAT/SPDIF digital input.
- 02The interface is USB bus powered; its listed requirements are USB 3.0 at 900 mA/5 V or USB-C at 1.5 A/5 V.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many mic preamps are built in?
The iD14 MKII has two Audient Console microphone preamplifiers.
02Can I expand the microphone inputs?
Yes. Its ADAT/SPDIF digital input supports adding up to eight extra microphone preamps.
03Does it require a power outlet?
No. The interface is USB bus powered.
04What can the iD button control?
It can be assigned to DIM, CUT, mono sum, polarity reverse, or cue-mix monitoring.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Frequency Response At Unity Gain
- ±0.5dB 10Hz to 40kHz
- Frequency Response
- ±0.1dB 10Hz to 40kHz
6 detailsConnections & power
- Line Output Dynamic Range
- 126dBA
- Power Requirements
- USB 3.0 - 900mA at 5V or USB-C - 1.5A at 5V
- Max Power with 30 Ohm Load
- 220mW
- Max Power with 62 Ohm Load
- 280mW
- Max Power with 600 Ohm Load
- 100mW
- Line Output Thd N
- 0.0005%
1 detailsSize & weight
- Dimensions
- 6.81 inch x 4.72 inch x 2.41 inch
1 detailsIn the box
- Included Cable
- USC type-C
6 detailsOther
- Mic Pre Snr
- 100dBA
- Adc Dynamic Range
- 121dB
- Mic Pre Ein
- 128dBA
- Adc Thd N
- <0.001%
- Mic Gain
- 58dB
- Mic Pre Thd N
- <0.002%
