Detail 01
Power amplifier, not an integrated amp
No volume-shaping preamp or tone controls. It amplifies whatever line-level signal you send it, so a mixer or interface has to come first.
Product detailSKU #1273887987169
ArtSLA-2 Studio Power Amplifier
1/4
Independent shopping perspective
The Korena take
Rack-mount stereo power amplifier for studio use. For driving passive monitors or a headphone distribution system from a mixer or interface output.
Strong match
Who this is for
- Powering passive studio monitors from a line-level source
- Feeding a headphone distribution system in a tracking room
- Adding clean amplification to a rack without a big footprint
Consider the trade-offs
When to look elsewhere
- Anyone using active monitors — they already have amps built in
- Guitar or bass players wanting an instrument amp; this has no preamp or tone shaping
- Large-room PA duty at high sustained volume
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Studio-oriented design
Built for nearfield listening levels and low noise floor rather than maximum output for a room full of people.
Detail 03
Rack format
Mounts in a standard rack alongside your other gear instead of sitting loose on a desk.
Detail 04
Speaker-level output
Connects to passive speakers only. Plugging this into an active monitor's line input can damage the monitor.
Detail 05
Fixed gain stage
Level control lives upstream in your mixer or interface, so you need something with an output fader in the chain.
Final check
Know before you order
- 01No speakers, cables, or rack screws included.
- 02Check your monitors' impedance and power handling before matching them to this amp.
- 03Confirm your source outputs line level — an instrument or mic signal is too quiet.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I use this with active studio monitors?
No. Active monitors have their own built-in amplifiers and take a line-level input. This amp outputs speaker level, which would damage them.
02Do I need a mixer to use it?
You need something ahead of it with a line-level output and volume control — a mixer, audio interface, or monitor controller. The amp has no preamp of its own.
03Will it work as a headphone amp?
It can drive a headphone distribution system, but it is not a direct-to-headphone amplifier. Route it through a distribution unit rather than plugging headphones in.
04Is this loud enough for live sound?
It is designed around studio monitoring levels. For a full room PA at sustained volume, look at an amplifier rated for that duty.
