Korena
Product detailSKU #1500000376777

ApogeeBOOM 2x2 Audio Interface

Apogee
Apogee BOOM 2x2 Audio Interface
1/8

Independent shopping perspective

The Korena take

Apogee BOOM is a compact USB-C interface with one XLR/TRS combo input and a separate 1/4-inch input for line-level equipment. Its onboard Symphony ECS Channel Strip applies three-band EQ, compression, and drive to both inputs at once with zero latency, so effects can be used while recording or monitoring without adding CPU load. USB-C power keeps the setup self-contained, and loopback brings multiple audio sources into a livestreaming workflow. It also works with iOS, including touch control of the ECS Channel Strip on iPad.

Apogee BOOM 2x2 Audio Interface product detail
Product studyApogee BOOM 2x2 Audio Interface
Apogee BOOM 2x2 Audio Interface alternate view
Alternate view

Strong match

Who this is for

  • Recording a microphone or instrument alongside a separate 1/4-inch line-level source.
  • Livestreaming setups that need loopback for multiple audio sources.
  • Portable iPad recording with touch control over the ECS Channel Strip.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Apogee BOOM 2x2 Audio Interface construction detail

Detail 01

Up to 62 dB mic-preamp gain

The microphone input provides up to 62 dB of available gain.

Detail 02

DSP on both inputs simultaneously

EQ, compression, and drive can be engaged on both inputs at the same time with zero latency.

Detail 03

USB-C powered

No separate power supply is needed.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01What inputs does BOOM have?

It has an XLR/TRS combo input for microphones and instruments, plus a standard 1/4-inch input for line-level gear.

02Can the effects be used while recording?

Yes. The Symphony ECS Channel Strip can be applied while recording or used for monitoring, with zero latency.

03Does BOOM support iPad?

Yes. It works with iOS devices, and an iPad can control the ECS Channel Strip by touch.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsSound
Frequency Response
20Hz–20kHz: > +/–0.05dB
8 detailsConnections & power
Input Impedance
6.4K ohms
Max Input Level
18dBu (active), 8dBu (passive)
Hph Output Impedance
0.5 ohms
Max Output Level Headphones
15dBu
Max Input Level 4dbu
+18dBu
Max Output Level 4dbu Ref
+15dBu
Max Input Level 10dbv Ref
+6dBV
Line Output Impedance
100 ohms
4 detailsOther
Ein
128dB (un-weighted) @ 62dB, 150-ohm input
Dynamic Range
117dB (A-weighted)
Rel Thd N
–107dB
Freq Response
20Hz–20kHz: > +/-0.2dB (@44.1kHz)

Worth comparing

More from Apogee