Detail 01
Dual Dante RJ-45 ports
Each carries 64 channels of 24-bit/192 kHz audio; the second port can serve as a backup Dante route.
Product detailSKU #1500000335705
Antelope AudioGalaxy 64 Synergy Core Audio Interface
Sale
1/8
Independent shopping perspective
The Korena take
Galaxy 64 Synergy Core brings 64-channel AD/DA conversion, networking, DAW connection, routing, and real-time plug-in processing into a 2U rack system. Its two Dante ports, four HDX ports, and Thunderbolt connections can operate simultaneously, making it a central hardware frame for production, live, broadcast, or enterprise workflows. Onboard processing uses 12 ARM DSPs and two FPGAs, allowing plug-in monitoring without computer CPU load. It includes 36 real-time plug-ins, and each of 64 channel strips can host up to eight plug-ins.
Strong match
Who this is for
- Facilities connecting Dante audio networking, Pro Tools HDX, and Thunderbolt DAWs at the same time.
- Live-performance systems needing real-time plug-in monitoring handled by the interface rather than the computer.
- Studios moving between projects where fast preset recall supports distinct routing workflows.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Four HDX ports
They support a 128-channel, 192 kHz arrangement across two HDX cards.
Detail 03
64 virtual channel racks
Each of the 64 channel strips can load up to eight plug-ins at once.
Final check
Know before you order
- 01A Thunderbolt cable is not included.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can Dante, HDX, and Thunderbolt be used simultaneously?
Yes. The interface is designed for those connection options to operate at the same time with multiple systems.
02How many Synergy Core plug-ins are included?
It includes 36 real-time plug-ins.
03Does it provide Dante redundancy?
Yes. Its secondary Dante RJ-45 port can serve as a backup 64-channel Dante route.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Impedance Load
- 120 Ohms
2 detailsPickups & controls
- Control Panel Support
- Supported
- Remote Control
- Supported, (Over USB Type-C)
1 detailsBody & build
- Bridge Type
- Tremolo
13 detailsConnections & power
- Primary Secondary Ports
- 4 Primary
- Session I O Support
- Yes (16 x16)
- Loop Sync Output
- 1 x Output @ 75 Ohms 3Vpp on BNC
- Connectivity
- Dual Ethernet, switched or redundant
- Input Connection
- 8 x DC-Coupled D-Sub 25-pin
- Output Connection
- 1 x 1/4” 6.35 mm Jack (3 pin)
- Supported Sample Rates
- 44.1 kHz–192 kHz, 24-bit PCM
- Input Level Trim
- 14 dBu to 24 dBu in steps of 1 dB
- Word Clock Input
- 1 x Input @ 75 Ohms 3Vpp on BNC
- Word Clock Output
- 6 x Output @ 75 Ohms 3Vpp on BNC
- Output Level
- 20dBu
- Loop Sync Input
- 1 x Input @ 75 Ohms 3Vpp on BNC
- 10m Atomic Reference Input
- 1 x Input @ 75 Ohms 1Vpp on BNC
15 detailsOther
- Madi Protocol
- AES10-2003
- Daisy Chain
- Supported
- Aes Mode
- AES/EBU
- I O Channel Count
- 2 Channels
- Smux
- Supported
- S Pdif Src
- Supported
- Delay Compensation
- Supported
- Chanel Count
- 2 Channels
- Redundancy
- Supported
- Interface Connection
- 2 x XLR Connectors
- Manual Delay Compensation
- Supported, (up to 128 samples)
- Dynamic Range
- 122 dB
- Thunderbolt Cable
- Not Included
- Madi Mode
- Dual Wire, Optical
- Thd N A
- -115 dB
