Detail 01
Ratio controls
They act as independent master volumes for the clean and overdrive channels.
Product detailSKU #1500000472101
Amplified NationPhoenix Fury 50W Tube Guitar Amp Head - Turquoise Suede
1/2
Independent shopping perspective
The Korena take
Phoenix Fury is a 50W, two-channel tube guitar amp head with clean and overdrive voices, powered by two 6L6GC tubes. Each channel has its own gain control and Ratio master volume, letting you balance their levels independently. Normal and FET inputs offer two ways to feed the preamp; the FET input adds a transistor-based gain stage. Bright, Mid, Rock/Jazz, and Overdrive/Pedal switches expand the control set. Tube-driven spring reverb uses separate Send and Return controls, while the included two-button footswitch, passive effects loop, and multiple speaker outputs support a stage or studio rig.
Strong match
Who this is for
- Stage or studio rigs requiring independent channel level balancing and footswitchable channel changes.
- Players who want normal and FET inputs to alter how hard the preamp is driven.
- Setups using tube-driven spring reverb with separate Send and Return adjustment.
Consider the trade-offs
When to look elsewhere
- Players looking for a single-channel amplifier; the Phoenix Fury has clean and overdrive channels.
- Anyone needing a combo amplifier; the product is specified as a guitar amplifier head.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Normal and FET inputs
The FET input adds a transistor-based gain stage to push the preamp harder.
Detail 03
Tube-driven spring reverb with Send and Return
Separate Send and Return controls shape the reverb effect.
Detail 04
Two-button footswitch
It controls channel switching and preamp boost.
Detail 05
Speaker outputs
The rear panel provides two 4-ohm outputs plus one 8-ohm and one 16-ohm output.
Final check
Know before you order
- 01The head has separate normal and FET 1/4-inch inputs.
- 02Plan speaker connections around the listed 4-, 8-, or 16-ohm outputs.
- 03A two-button footswitch is included.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What power tubes does the Phoenix Fury use?
It uses two 6L6GC power tubes and has a 50W power output.
02What does the FET input do?
It adds a transistor-based gain stage to push the preamp harder for added saturation and bite.
03Does it include a footswitch?
Yes. A two-button footswitch is included for channel switching and preamp boost.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Effects Loop
- Yes
- EQ
- 3-band EQ
3 detailsPickups & controls
- Switching
- Bright, Mid, Rock/Jazz, Overdrive/Pedal
- Footswitch
- 2-button footswitch included
- Preamp Tubes
- 5 x 12AX7, 1 x 12AT7
1 detailsBody & build
- Color
- Turquoise Suede
4 detailsConnections & power
- Outputs
- 2 x 1/4 inch (4 ohms), 1 x 1/4 inch (8 ohms), 1 x 1/4 inch (16 ohms)
- Inputs
- 2 x 1/4 inch (normal/FET)
- Power Output
- 50W
- Power Tubes
- 2 x 6L6GC
2 detailsSize & weight
- Weight
- 30
- Dimensions
- 24 inch x 10.75 inch x 11.5 inch
8 detailsOther
- Level
- Global master volume
- Accent
- Presence control
- Gain
- Per-channel gain control
- Product Type
- Tube guitar amplifier head
- Channels
- 2 (clean/overdrive)
- Series
- Phoenix Fury
- Reverb
- Send, Return
- Ratio
- Independent master volume per channel
