Detail 01
1.5 inch
That's the tube's outside diameter it grips. Larger truss tubing or thinner pipe won't seat properly in it.
Product detailSKU #1273887986696
American DJLighting Fixture 1.5" O-Clamp
1/8
Independent shopping perspective
The Korena take
A basic black clamp for hanging a lighting fixture on 1.5-inch pipe. Buy one per fixture for a DJ or small stage rig.
Strong match
Who this is for
- Hanging par cans or small fixtures on 1.5-inch pipe
- Mounting to a lighting stand's T-bar of matching diameter
- Adding fixtures to an existing rig one at a time
Consider the trade-offs
When to look elsewhere
- 2-inch truss tubing or square-section truss members
- Anyone wanting a quick-release clamp for fast changeovers
- Fixtures with proprietary brackets that don't take a standard clamp
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
O-clamp shape
It captures the pipe all the way around, so the fixture is less likely to rotate if it gets knocked.
Detail 03
Black finish
Disappears against dark pipe and truss instead of catching stage light and drawing the eye upward.
Detail 04
Ten dollars each
This is a per-fixture cost. A six-light rig needs six clamps, so factor that into the total.
Final check
Know before you order
- 01Measure your pipe's actual outside diameter, not its nominal plumbing size
- 02Budget a safety cable for each fixture — not included here
- 03Confirm your fixture's yoke takes a standard clamp bolt before ordering
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this fit 2-inch truss?
No. It's cut for 1.5-inch tube. On a 2-inch member it won't close around the pipe at all.
02Does it come with a safety cable?
No. That's a separate purchase, and most rigging practice calls for one on every fixture regardless of the clamp.
03Can I use it on a lighting stand crossbar?
Yes, as long as the crossbar measures 1.5 inches across. Many DJ stand T-bars are that size.
04How many do I need?
One per fixture for most small lights. Heavier fixtures with two mounting points on the yoke take two.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
4 detailsOther
- Category Source
- detail
- Tier
- new
- Korena Special
- false
- Source Id
- site51273887986696
Worth comparing
1 of 12
More from American DJ
1 of 8
