Detail 01
Independently assignable high, mid, and low bands
Lets effects be applied separately across the three frequency bands.
Product detailSKU #1500000476338
AlphaThetaRMX-IGNITE Remix Station and DJ Effects Processor
1/6
Independent shopping perspective
The Korena take
RMX-IGNITE is a DJ effects processor that puts band-specific processing and sample performance in the same compact unit. High, mid, and low bands can be assigned independently, letting lever and rotary effects reshape different parts of a mix rather than treating the entire signal alike. Four illuminated pads handle the onboard sampler, with 20 preloaded sounds, user-sample import, overdub looping, and Groove Roll patterns. PRO DJ LINK support and digital send/return with compatible mixers help keep rhythm-based effects and routing aligned in a performance setup.
Strong match
Who this is for
- Sets that use frequency-specific effects to build transitions, breakdowns, and releases from a DJ mixer.
- Performances that combine triggered samples, one-bar overdub looping, and 10 Sample Roll patterns.
- PRO DJ LINK setups needing BPM and grid synchronization for rolls and rhythm-based effects.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
4 trigger pads with white LEDs
Provides four illuminated controls for sample playback.
Detail 03
20 preloaded samples; USB and PRO DJ LINK import
Offers supplied sample content plus routes for adding user samples.
Detail 04
Release Echo: Dry and Mute modes
Provides two Release Echo operating modes.
Detail 05
Digital send/return via compatible DJ mixers
Supports digital send/return integration with compatible mixers.
Detail 06
96 kHz sampling; 64-bit mixing DSP
Defines the unit's sampling rate and internal DSP processing.
Final check
Know before you order
- 01Digital send/return requires a compatible DJ mixer.
- 02User samples are imported through USB or PRO DJ LINK.
- 03It has one 1/4-inch TS analog input and one 1/4-inch TS analog output.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I load my own samples?
Yes. User samples can be imported using USB or PRO DJ LINK.
02How many sample pads are included?
Four white LED trigger pads.
03Does it work with PRO DJ LINK?
Yes. It supports PRO DJ LINK for BPM and grid synchronization with compatible CDJs and DJ players.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
5 detailsSound
- Sampler Effects
- Echo, space, filter, pitch, decay and swing
- Frequency Response
- 20Hz–40kHz
- Effect Architecture
- 3-band multi-effects processor
- Lever Effects
- Echo, reverb, juggle, reverse, solo and stretch
- Isolate Effects
- Tape, echo, reverb, drive, filter, ducker and rhythm
1 detailsPickups & controls
- Controls
- Levers, large knobs, encoder and buttons
1 detailsBody & build
- Color
- Black
4 detailsConnections & power
- Analog Output
- 1 x 1/4 inch TS jack
- Analog Input
- 1 x 1/4 inch TS jack
- Power Requirements
- AC100V–240V 50Hz and 60Hz
- Sample Import
- User samples via USB and PRO DJ LINK
2 detailsSize & weight
- Weight
- 5.1
- Dimensions
- 13.4 inch x 8.4 inch x 2.9 inch
21 detailsOther
- Bands
- High, mid and low independently assignable
- Release Echo
- Dry mode and mute mode
- Signal to Noise Ratio Mst
- 115dB A-weighted
- Sample Roll
- 10 rhythmic roll patterns with groove roll
- Sample Pads
- 4 trigger pads with white LEDs
- Lan
- 1 x 100BASE TX port
- Total Harmonic Distortion
- 0.0018%
- Ad and Da Conversion
- 32-bit
- Signal to Noise Ratio Cdj
- 108dB A-weighted
- Display
- Multicolor display screen
- Built in Samples
- 20 samples preloaded
- Signal to Noise Ratio Send Return
- 114dB A-weighted
- Overdub
- 1-bar looping overdub mode
- DSP Processing
- 64-bit mixing DSP
- Sampling Rate
- 96kHz
- Product Type
- DJ effects processor
- Digital Send and Return
- Supported via compatible DJ mixers
- Series
- RMX
- USB Type A
- 1 port
- USB Type C
- 2 ports
- Pro Dj Link
- Supported
