Detail 01
Unfinished maple neck with rosewood veneer fretboard
The neck is supplied without finish and has a veneered rosewood fingerboard.
Product detailSKU #1500000393183
AllpartsTRO-62 Telecaster Replacement Neck, Maple With Rosewood Veneer Fretboard
1/3
Independent shopping perspective
The Korena take
TRO-62 is an unfinished 21-fret maple replacement neck for Telecaster guitars, topped with a veneered rosewood fretboard. It is officially licensed by Fender and made in Japan. The neck arrives ready for a sprayed finish, giving a repair or build project room for its own finishing work. Its pre-radiused 7.25-inch board, C profile, vintage frets, square heel, and heel-end truss-rod adjustment define the supplied format. Woodgrain varies between individual necks.
Strong match
Who this is for
- Telecaster replacement projects that need an unfinished 21-fret maple neck.
- Builds where the neck will be sealed and finished before installation.
- Projects seeking a 7.25-inch pre-radiused rosewood-veneer fretboard.
Consider the trade-offs
When to look elsewhere
- Projects needing a neck that arrives with a completed finish.
- Installations where fret leveling and polishing cannot be accommodated.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
21 frets; 7.25-inch fretboard radius
These are the supplied fret count and pre-radiused fingerboard specification.
Detail 03
25.5-inch scale length
The scale length is specified at 25.5 inches.
Detail 04
2-3/16-inch square heel
The supplied heel width is 2-3/16 inches and its shape is square.
Detail 05
Heel truss-rod adjustment
The truss rod is adjusted at the heel.
Final check
Know before you order
- 01Seal the unfinished neck before installation to protect it from moisture.
- 02Fret leveling and polish may be required; this is described as normal rather than a defect.
- 03Woodgrain differs from neck to neck.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is the TRO-62 finished?
No. It is unfinished and ready to spray; sealing is recommended before installation.
02What guitars is it for?
It is a replacement neck for Telecaster guitars.
03May it need fret work?
Yes. Fret leveling and polishing may be needed, and that is not considered a defect.
04Where is the truss-rod adjustment?
The truss rod adjusts at the heel.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Pickup Configuration
- SS
5 detailsPlayability
- Frets
- Tall (.079 inch x .043 inch)
- Nut Width
- 1
- Number of Frets
- .079
- Fretboard Radius
- 7.25 inch
- Scale Length
- 25.5
8 detailsBody & build
- Neck Profile Shape
- C
- Body Style
- C
- Body Shape
- C
- Body Finish
- None/Unfinished
- Inlays
- White fretboard and side marker dots
- Wood
- Maple with veneered rosewood fretboard
- Finish
- None/Unfinished
- Neck Wood
- Maple
1 detailsSize & weight
- Heel Width
- 2-3/16 inch
2 detailsOther
- Heel Shape
- Square
- Truss Rod Adjustment Location
- Heel
