Detail 01
8 ohm
Run two of these for 4 ohms total. Alone, most heads deliver less than their full rated power into it.

Independent shopping perspective
A 350-watt 2x10 bass cabinet, 59 pounds, wired for 8 ohms. For players who want the option of stacking a second cab.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Run two of these for 4 ohms total. Alone, most heads deliver less than their full rated power into it.
Detail 02
Comfortable with heads in that range. Two of these split the load and raise headroom substantially.
Detail 03
Efficient enough that the power lost to 8 ohms is less audible than the wattage difference implies.
Detail 04
Roughly low E on a 4-string. Below that you get harmonics, not the fundamental.
Detail 05
Two-hand lift each. A stacked pair is 118 pounds and two trips to the car.
Detail 06
Two stack to about 33 inches tall, putting the top speaker near hip height for on-stage monitoring.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
8 ohm if you might add a second cab, since a pair totals 4 ohms. 4 ohm if one cab is your permanent rig and you want full amp output.
Most heads give roughly half to two-thirds of their 4-ohm output at 8 ohms. With 102 dB sensitivity, that still covers most club stages.
Electrically yes, if the total impedance suits your head. Mixing cabs with different sensitivity means one carries more of the sound than you expect.
Less air moved and less low-end push, but half the box and 59 pounds instead of 90-plus. Two of these get you 4x10 territory with easier carries.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.